Table of Contents
Advertisement
QUANTUM QVOIP SERIES MANUAL
5.5 Extending Talk Time
The talk time timer is set on
full cycle by pressing #
5.6 Call the System from Remote Location
1.
The system must be install in
2.
Function code 38
must be set at least for 1 ring
3.
Function code 39
must be set to 1
4. You must have the system phone number
5. Call the system phone number if the system answered, short beep will be heard.
6. Press # then 4-digit Master code (default is 0000), short beep will be heard if master code is accepted
7. Press * to establish two ways communication
8. Press 9 to release relay 1 (door 1) or 8 to release relay 2 (door 2).
CHAPTER 6
QWCM Internet IP Module
The QWCM is only applicable for QR5IP. Click
QR5IP
DEFAULT SETTING
IP: 192.168.1.230
SUBNET: 255.255.255.0
GATEWAY: 192.168.1.1
DNS: 192.168.1.1
USERNAME: Administrator
PASSWORD: 8888
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
function code
27. The warning beep will be heard one minute before the talk time is expired. It can be extended more another
Intercom and Call Forwarding Mode Wiring Diagram
here
for complete manual for QWCM
or
Call Forwarding Mode wiring Diagram
Advertisement
Table of Contents
