Table of Contents
Advertisement
QUANTUM QVOIP SERIES MANUAL
1 to clear all access code then press #
* to cancel
Function Code 09 - Access Code Digit
1.
Log-in to programming
2.
Enter 09 then #|
3. Enter 4, 5, 6, 7 or 8 (default setting is 4 digit) then press #
Function Code 10 - Add New Card
1.
Log-in to programming
2.
Enter 10 then #
3.
Present the card in front of the card reader black window, the number will register automatically (or enter the last 8 digits of the number on the card)
then press #or press the transmitter button (the number will automatically register) then press #
4.
Enter name up to 16 characters then press #
5.
Enter door 1 or 2, or 3 for both then press #
6.
Enter time zone 1-3 then press #
7.
Enter 00
(24
hours) - 20 see
8.
Enter satellite system ID 0-7
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
or
see
Chapter 3
for keypad layout
function code 17
then press #
(enter 0 if no satellite connected to the
QR5) then press #
Advertisement
Table of Contents
