Function Code 23 Lock-Out Count; Function Code 24 Alarm - PACH & COMPANY QUANTUM QC Series Manual

QC SERIES MANUAL
1. Log-in to programming
2.
Enter 21 then #
3. Enter
0= disable (default setting)
1= Enable control by relay 2 open door interval, see
2= relay 2 control by AUXIN2
then press #
Function Code 22 - Do Not Disturb
If Do Not Disturb is enabled, then the calling feature is disabled.
1. Log-in to programming
2. Enter 21 then #
3. Entert 0= disable, 1= enable then press #

Function Code 23 Lock-out Count

The system will be disabled in about 60 seconds after pressing invalid access code or swiping invalid card as specified on
the Lock-out Count.
1. Log-in to programming
2. Enter 23 then #
3. Enter 1-9 (default=3) then press #

Function Code 24 Alarm

file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
function code 29