Table of Contents
Advertisement
QUANTUM QVOIP SERIES MANUAL
1.
Log-in to programming
2. Enter 51 then #
3. 1st segment, enter the characters then press # see
4. 2nd segment, enter the characters then press # see
CHAPTER 5
Operations
5.1 Call from the System
1. Direct Call: press # then directory code, see
2. Scrolling: press 3 or 6 to scroll name then press # to call the selected name
5.2 Opening Door Remotely
Relay 1 (door 1), press 9
Relay 2 (door 2), press 8
5.3 Opening Door Using Access Code, Temporary Code, and Special Code
Access code Standard Operation is keyless entry code to open the door and door will be closed automatically, see
Temporary Code is used for limited number of times, maximum 10 times then the code will be expired, see
Special Code is used to unlock hold door and then use same code to lock the door, see
Press * (display will stop scrolling) then press the 4, 5, 6, 7 or 8 digit access code as programmed on
5.4 Opening Door Using Card, Temporary Card, and Special Card
The Quantum Q9000VOIP Series has built-in card reader. The door can be access using UFOB, UCLAM or UISO.
Card Standard Operation is used to open the door and door will be closed automatically, see
Temporary Card is used for limited of times, maximum 10 times then the card will be expired, see
Special Card is used to unlock hold door and then use same card to lock the door, see
Pach and Company UFOB, UCLAM and UISO must be used to have access to the card reader. Other manufacturers card will not work.
Swipe the card as shown below. The card reader antenna is mounted behind the black square window.
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
Chapter 3
for keypad layout
Chapter 3
for keypad layout
function code 19
function code 06
function code 33
function code 34
Function Code 09
function code 10
function code 35
function code 36
Advertisement
Table of Contents
