Table of Contents
Advertisement
QUANTUM QVOIP SERIES MANUAL
Function Code 04 - Clear All Tenant Directories
1.
Log-in to programming
2.
Enter 04 then #
3.
Do the following:
- Press 1 (to clear all directories) then press #
- Press * to cancel
Function Code 05 - Call Forwarding
Enable or disable call. Default setting= 1 (enable). If 1 (disable) is selected, the system can't make calls
1.
Log-in to programming
2. Enter 30 then #
3. Enter 0= disable (default) pr 1= enable then press #
Function Code 06 - Add New Access Code
An access code is a keyless entry code to unlock the door. An access code can be programmed in 4, 5 ,6,7, or 8 digits, see
access code number of digit.
1.
Log-in to programming
2.
Enter 06 then #
3.
Enter the access code (4-8 digit, see
4.
Enter name up to 16 characters, then press #
file:///C|/PACH-CO.COM-2020/online_manual/q9000voip_series_manual.htm[1/17/2020 10:02:05 AM]
if directory does not exist
function code 09
), then press #
see
Chapter 3
for keypad layout
function code 09
to change the
Advertisement
Table of Contents
