Chapter 4 System's Operation - PACH & COMPANY Aegis 7000 Plus Installation And Programming Manual

Chapter 4
SYSTEM'S OPERATION
A. How to view tenant's directory
B. How to initiate a call from the system
C. How to release the door remotely
D. How to make a call to an extension or voice
mail
E. How to extend talk time
F. How to call into the system
AeGIS 7000P
1. Press (scroll A-Z) or
2. Press (scroll Z-A)
Two ways to initiate a call
1. By scrolling (see A, press 3 or 6 to scroll) then
press # to call
2. By directory, press # (wait for dial tone) then
press the tenant's directory number.
NOTE: VISITOR MUST KNOW THE TENANT'S
DIRECTORY NUMBER
1. Establish a communication
2. Tenant must press 9 to release the door.
ALTHOUGH, THE SYSTEM IS TESTED
WITH MOST PHONES, COMPATIBILITY ISSUE
MAY STILL BE OCCURRED, ESPECIALLY WITH
VOICE OVER IP (VOIP) PHONE.
PULSE PHONE WILL NOT WORK
1. Established a communication
2. Press the voice mail or extension number
using the system's keypad.
Talk time is set using function code 70 (10-180
seconds), see p18.
1. Establish a communication
2. Warning beep will be heard 10 minutes before
the talk time expired.
3. Press # to extend the talk time
You must know the system's phone number
1. Call the system's phone number
2. The system will answer between 2
then BEEP BEEP!
3. Press to establish communication
4. Press 9 to release the door.
nd th
- 4 rings,
will be heard
Page 21