Listing And Code Approvals; Appliance Certification; Btu & Efficiency Specifications; Glass Specifications - Quadra-Fire 57ST-ACC-AU Owner's Manual

5700 Step Top AU Wood Appliance
1

Listing and Code Approvals

A. Appliance Certification
Model: 5700 Step Top AU Wood Appliance
Laboratory: Vipac
Report No: 30A-14-0102-TRP-361517-0
Type: Hardwood only at 25% dry basis
Standard: AS/NZS4013 for Hardwood
B. BTU & Efficiency Specifications
Overall Average Efficiency
Burning Hardwood (AS/NZS 4012)
Average Particulate Emission
Factor Burning Hardwood (AS/
Maximum Average Heat Output
Burning Hardwood
Firebox Size: 2.90 cubic feet
Recommended Wood Length: 22 inches
Fuel Orientation: Front-to-Back
Approved Fuel
NOTE: Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their
specifications and/or price without notice.
The Quadra-Fire 5700 Step Top Australian Wood Appliance is Hardwood Certified. Hardwood Particulate Emissions
This wood appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate
this wood appliance in a manner inconsistent with operating instructions in this manual.
7
65%
1.5 g/kg
NZS 4013)
12.7 kW
Wetbacks are
NOT an approved
Wetback
option and must
be fitted.
Vent Size: 6 inches
Hardwood only
with a Moisture
content less than
25% (dry basis)
equaling 1.5 g/kg with a Space Heating Efficiency of 65%.
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please
contact your dealer for replacement glass.
Fire Risk.
Hearth & Home Technologies disclaims any
responsibility for, and the warranty will be
voided by, the following actions:
• Installation and use of any damaged appliance.
• Modification of the appliance.
• Installation other than as instructed by Hearth &
Home Technologies.
• Installation and/or use of any component part not
approved by Hearth & Home Technologies.
• Operating appliance without fully assembling all
components.
• Operating appliance without legs attached (if
supplied with appliance).
• Do NOT Over fire - If appliance or chimney
connector glows, you are over firing.
Any such action that may cause a fire hazard.
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information, consult a qualified
installer, service agency or your dealer.
7038-249C
WARNING
07/21