Changing Batteries And Notices - Gree FP-8XD-E Service Manual

 Press FAN button to set fan speed from AUTOFAN , LOW , MID and HIGH.
 Press button to select SWING mode.
 Press +and - buttons simultaneously to lock or unlock the wireless remote control. If it is locked,
the mark will display; when pressing any button, the mark will blink for three times but the air
conditioner has no respondence. If unlocked, the mark will disappear.
 Switch between Fahrenheit and Centigrade.
When unit is under Off state, press MODE and – button simultaneously to switch between º C and º F.

1.2.2 Changing batteries and notices.

Slightly to press the place with
remote control. (As show in figure)
Take out the old batteries. (As show in figure.)
Insert two new AAA1.5V dry batteries, and pay attention to the polarity. (As show in figure)
Attach the back cover of wireless remote control. (As show in figure)
NOTE:
(a) The design of this unit conforms to the requirements of ISO5151 standard.
(b) The air volume is measured at the 0Pa external static pressure.
Cooling (heating) capacity stated above is measured under nominal working conditions
(c)
corresponding to 0Pa external static pressure. The parameters are subject to change with the
improvement of products, in which case the values on the nameplate will prevail.
CONTROL
, along the arrowhead direction to push the back cover of wireless
31