Gree FP-8XD-E Service Manual page 31

(2) MODE button
Press this button, Auto, Cool, Dry, Fan Heat mode can be selected circularly.
Auto mode is not available in this mode.
(3) SLEEP button
Press this button to select Sleep On/Sleep Off. If power is on, Sleep Off is default. If the unit is turned
off, the Sleep function setting will be not retained in memory. If Sleep function is on, the mark of Sleep
will display. In this mode, the time of timer can be adjusted. Under Fan and Auto modes, this function is
not available.
(4) FAN button
Press this button, Auto, Low, Medium, High-speed can be circularly selected. After powered on, Auto
fan speed is default. Under Dehumidify mode, Low fan speed is default.
Note: Under the Dry mode, the fan speed isn't adjustable, low fan speed is default.
(5) CLOCK button
Press Clock button to set the time of clock. When blinks and displays, you can set the time by
pressing + or - button. If no button is pressed within 10 seconds the remote will revert back to the normal
display. Press again to accept the setting. If it is set the first time, 12:00 is the initial value. Note: If
mark displays on the LCD, it means it is the time of clock, if not, it is the time of timer.
(6) LIGHT button
Press this button to select LIGHT On/Off in the displayer. When the LIGHT On is set,the mark will be
displayed and the indicator light in the displayer will be on. When the LIGHT Off is set, the mark will
disappear and the indicator light will be off.The function is not available for this mode.
(7) X-FAN button
Press this button to turn on/off the X-FAN function.
The function is not available for this mode.
(8) button
Presetting temperature can be decrease the temperature by 1 degree Celsius once.
press and hold for more than two seconds so that we can change the temperature
continuously. The minimum and maximum setting range of the temperature is 16 to 30
degree Celsius.
(9) + button
Press this button increase the temperature by 1 degree Celsius once. Press and hold for
more than two seconds so that we can change the temperature continuously. The
minimum and maximum setting range of the temperature is 16 to 30 degree.
(10) TEMP button
Press this button to select the display of either indoor setting temperature or indoor
ambient temperature. When the indoor
display is default. Change status toto display the ambient temperature. If received control
signal in 5 seconds, the display temp.will revert back to setting temperature. When unit is
CONTROL
unit powered on firstly, setting temperature
29