Table of Contents
Advertisement
Meter Specifications
Flange Connection:
Flow Rate:
Maximum Pressure:
Working Temperature: -20 F to 160 F (-28.9 C to 71 C)
Meter Types
SP - Standard Petroleum
For metering refined petroleum products such as Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene,
Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol (Antifreeze), etc.
SPA - Standard Petroleum (Aviation)
For metering refined petroleum products such as Aviation Gasoline, Jet Fuels, Ethanol, Gasoline, Fuel
Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.
SPD - Standard Petroleum (Ductile Iron)
For metering refined petroleum products such as Ethanol, Methanol, Gasoline, Fuel Oils, Diesel,
Bio-Diesel, Kerosene, Aviation Gasoline, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.
AF - All-Ferrous
For metering Pesticides, Fertilizers, Food Processing Liquids, Industrial Chemicals, Solvents, Paints,
Inks, Alcohols and many other liquids such as Liquid Sugars, Liquid Feeds, MEK, Ethanol, Corn Syrup,
Soy Bean Oil, Shortenings, Latex Products, Adhesives, Naptha, etc.
IP - Industrial Products
For Food Processing, Chemicals, General Solvents and many other liquids such as Corn Syrup, Soy Bean
Oil, Liquid Sugars, Shortenings, Latex Products, Adhesives, etc.
IC - Industrial Products (Carbon Bearings)
For metering Alcohols, Chemicals, Solvents, Water and many other non-lubricating liquids, such as
Acetones, Ethanol, Naptha, Xylene, MEK, Toluene, Resins, etc.
Page 5
3" NPT Flange Connection, 2" NPT Flange. Optional BSPT,
Slip Weld or ANSI flanges available upon request.
700-30 up to 200 GPM (760 LPM)
700-35 up to 300 GPM (1135 LPM); only for fluids under 225
SSU
150 PSI (10.5 BAR)
-40 F to 160 F (-40 C to 71 C) with low temperature seal kit
Check us out at www.TCSmeters.com!
TCS900003, Rev.6
04/26/2016
Advertisement
Table of Contents
Troubleshooting
