Meter Specifications
Flange Connection:
Flow Rate:
Maximum Pressure:
Working Temperature: -20 F to 160 F (-28.9 C to 71 C)
Meter Types
SP - Standard Petroleum
For metering refined petroleum products such as
Leaded and Unleaded Gasoline, Fuel Oils, Die-
sel, Bio-Diesel, Kerosene, Jet Fuels, Vegetable
Oils, Motor Oils, Ethylene Glycol (Antifreeze),
etc.
SPA - Standard Petroleum (Aviation)
For metering refined petroleum products such as
Aviation Gasoline, Fuel Oils, Jet Fuels, Gaso-
line, Diesel, Bio-Diesel, Kerosene, etc.
SPD - Standard Petroleum (Ductile Iron)
For metering refined petroleum products such as
Aviation Gasoline, Ethanol Blends, Methanol
Blends, Gasoline, Fuels Oils, Diesel, Bio-Diesel,
Kerosene, etc.
3" NPT Flange Connection, 2" NPT Flange. Optional BSPT,
Slip Weld or ANSI flanges available upon request.
700-30 up to 200 GPM (760 LPM)
700-35 up to 300 GPM (1135 LPM); only for fluids under 225 SSU
150 PSI (10.5 BAR)
Page 5
IC - Industrial Products (Carbon Bearings)
For metering Industrial Chemicals, General
Solvents, Water and other Non-lubricating
Liquids, such as Alcohol, Acetones, Ethanol,
Naptha, Xylene, MEK, Toluene, Deionized
Water, Demineralized Water, Potable Water,
etc.
IP - Industrial Products
For metering Industrial Chemicals, General
Solvents and many other liquids; such as Liquid
Sugars, Corn Syrup, Soy Bean Oil, Shortenings,
Latex Products, Adhesives, etc.
AF - All Ferrous
For metering Pesticides, Nitrogen Solutions,
Fertilizer, Chlorinated Solvents, Paints, Inks,
Alcohols, Adhesives, Motor Oils, Molasses,
Corn Syrup, Liquid Sugars, etc.