Table of Contents
Advertisement
Receipt & Inspection
Upon receipt of meter shipment, be sure to inspect the packaging and the flow meter assembly for any damage
before signing the receipt of the shipment. Notify the delivery company about possible damage and refuse
receipt of the shipment.
Meters are individually boxed and are protected with packing material. Each package is identified with the flow
meter assembly part number, description, direction of flow and serial number. Verify the meter model is the
correct model, size, and configuration as ordered. Contact your distributor if there is any discrepancy or
question.
Meter assemblies should be handled with appropriate methods for the awkwardness of size and weight involved.
Appropriate clothing and shoes need to be utilized. Transport the meter package to the installation site with
appropriate transportation methods, careful not to damage the flow meter.
Be careful of any loose or protruding staples from the packaging, as they can be very sharp and may potentially
cause injury.
If foam has been used to protect meter, carefully remove top foam layer before attempting to remove meter
assembly from box. Foam packaging maybe formed around the meter assembly making it difficult to remove.
If meter is bolted to a wood pallet remove bolts while being careful not to let the meter tip over when the
support has been removed. Do not lift the meter assembly by flex hoses, thermowells, wires, pulsers, or put
objects through meter. Removing meter assembly from packaging without regard to these warnings may cause
serious injury.
The wooden pallets and bases meet the ISPM 15; Guidelines for Regulating Wood Packaging Material in
International Trade through the Timber Products Inspection Company (TP #2134).
Every effort has been made to remove the test fluid before shipment. All TCS flow meters are plugged and
enclosed in a plastic bag. The test fluid Material Safety Data Sheet (MSDS) can be reviewed on page 50.
Appropriate precautions should be taken regarding any personal, environmental and material compatibility with
the end use system.
Notice
Total Control Systems (TCS) shall not be liable for technical or editorial errors in this manual or omissions from
this manual. TCS makes no warranties, express or implied, including the implied warranties of merchantability and
fitness for a particular purpose with respect to this manual and, in no event, shall TCS be liable for special or
consequential damages including, but not limited to, loss of production, loss of profits, etc.
The contents of this publication are presented for informational purposes only, and while every effort has been
made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied,
regarding the products or services described herein or their use or applicability. We reserve the right to modify or
improve the designs or specifications of such products at any time.
TCS does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper
selection, use and maintenance of any TCS product remains solely with the purchaser and end-user.
All rights reserved. No part of this work may be reproduced or copied in any form or by any means – graphic,
electronic or mechanical – without first receiving the written permission of Total Control Systems, Fort Wayne,
Indiana USA.
Page 3
Check us out at www.TCSmeters.com!
TCS900003, Rev.6
04/26/2016
Advertisement
Table of Contents
Troubleshooting
