Environmental Requirements - Thermo Scientific TSQ 8000 Evo Preinstallation Manual

Environmental Requirements

Thermo Scientific
The normal operating environment for the TSQ 8000 Evo MS must have the following
characteristics:
• Indoor use only
• Altitude up to 2000 meters
• Maximum relative humidity between 5% and 95% up to 31 °C. The maximum relative
humidity decreases linearly to 67% as the temperature climbs to 35 °C.
Use the following guidelines to ensure your site has the proper environmental conditions for
the system:
1. Ensure that your room temperature is 15–35 °C (59–95 °F). The analytical performance
is only confirmed for these temperatures. For best performance, the operating
temperature should be constant. Use
will generate and ensure your air-conditioning system can handle that amount of heat.
IMPORTANT If you are not operating the TSQ 8000 Evo MS, it is safe to leave the
instrument powered on in a room with a temperature between 5 and 40 °C.
Table 5. Heat output of system components
Instrument
TSQ 8000 Evo, including foreline pump
TRACE 1300 and TRACE 1310
1
Computer
1
Monitor
Optional mech pump
AI/AS 1310 auto-injector/autosampler
TriPlus RSH autosampler
TriPlus 100 Liquid Sampler
TriPlus 300 Headspace autosampler
Direct Probe Controller
1
Power requirements vary by manufacturer.
2
With one power module.
3
With two power modules.
2. Ensure that the relative humidity in your laboratory is between 5 and 95% with no
condensation. A temperature and humidity monitor in your laboratory helps ensure that
the climate is within these specifications.
Table 5 to calculate the amount of heat your system
Heat Output (BTU
Heat Output (W)
per Hr)
4300 1260
6830 2000
2050 600
820 240
1880 550
325 95
2 3
683 or 1366 200
2 3
683 or 1366 200
4440 1300
820 240
TSQ 8000 Evo Preinstallation Requirements Guide
1
Site Preparation
Environmental Requirements
2 3
or 400
2 3
or 400
11