Table of Contents
Advertisement
Chapter 1 The Hybridization Oven 645
1
GeneChip™ Hybridization Oven 645 specifications
GeneChip
Hybridization Oven 645 specifications
™
Physical
dimensions
Power requirements
Environmental
requirements
Performance
Communications
24
Applied Biosystems GeneChip
Applied Biosystems Part Number 00-0331
Manufactured by Thermo Fisher Scientific, Model 308-1CEAFFY
The GeneChip
Hybridization Oven 645 is a General Purpose Laboratory Instrument.
™
The following dimensions are approximate, ±5%.
• Width: ~18 inches (~46 cm)
• Height: ~20 inches (~51 cm)
• Depth: ~21 inches (~53 cm)
• Weight: ~67 pounds (~30 kg)
Input Voltage:
• 100 to 120VAC, 5A max. (with selector switch set to "115")
• 220 to 240VAC, 2.5A max. (with selector switch set to "230")
50 to 60Hz
Input voltage selector switch is located on the rear panel.
Operating Temperature Range: 15°C to 30°C
Relative Humidity Range: 20% to 80% RH non-condensing.
Installation Category (overvoltage) II in accordance with IEC 664.
Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 2,000 meters.
Storage: -25°C to 65°C; 10% to 85% relative humidity.
Rotisserie Rotation Speed: 10 rpm to 80 rpm, programmable to 1 rpm
Oven Set Point Programmable Range: 30°C to 70°C, or ambient +5°C
Oven Temperature is programmable to 0.1°C.
Time to Temperature: 30 minutes from ambient to 60°C.
Oven Temperature Accuracy is ±2.0°C from 35°C to 60°C.
Nine pin RS-232 port, 9600 Baud rate. This monitors and reports oven temperature,
rotisserie rotation rate and oven status.
Hybridization Oven 645
™
GeneChip
™
Hybridization Oven 645 User Guide
Advertisement
Table of Contents
