Display - Videonics MXPro User Manual

Functions
D
ISPLAY
To control what appears on the Preview monitor, use the DISPLAY function. Press DIS-
PLAY to cycle through the different display configurations. See samples of these config-
urations on the next page. The illustrations show the key combination you can use to
directly access any display configuration.
STANDARD – Provides most extensive display. Shows preview images of all active
input sources and a menu of up to 30 different transitions from which you can
choose.
TWO CHANNEL – Displays preview images only for the CURRENT and NEXT
sources. Preview images increase in size, but Transitions Menu shows only 20
transitions.
FULL – Divides preview screen into four sections. Each section shows a preview
image of the currently active input sources. The Transitions Menu is not available.
NEXT – Displays only a full-screen preview image of the NEXT source.
CURRENT – Displays only a full-screen preview image of the CURRENT source.
When you run a transition, the Preview screen shows a full-screen image, running at
full frame-rate — the same as the signal going through the output channel.
73

Display