Continuous Audio - Videonics MXPro User Manual

Working with Audio

Continuous Audio

Example...
Suppose you taped a musical concert using two cameras. The first camera focuses on the
musicians and picks up the audio. The second camera focuses around the audience to get the
reactions of different listeners. You want to mix together the footage from both cameras, but
have only the audio from the first camera play through all transitions.
Procedure
To use continuous audio:
1
Set up the CURRENT and NEXT sources, and choose a transition.
Assume the tape from the first camera is on channel A, and the tape from the
second on channel B. Press CUT/A to make it the CURRENT source, press NEXT/
B to make it the NEXT source.
2 Press VIDEO/AUDIO until only the VIDEO light is on.
This tells MXPro that when the transition runs, only the video changes. For
example, press CUT to jump from the stage to the audience and the video on
channel A continues to play during the transition and into the next scene.
3
Continue pressing CUT (or using other transitions) to switch back and forth
between the stage and the audience.
117
Continuous Audio