Changing The Display Configuration; Input Source Previews - Videonics MXPro DV User Manual

B O
ASIC PERATIONS
Changing the Display Configuration
Press the
the Preview screen, or use the shortcut key indicated for each:
•
•
•
•
•
See "Display" beginning on page 87 for more information. Unless stated otherwise,
this guide assumes you are using the Standard preview.

Input Source Previews

A small, preview image from each input source appears in a separate window. Use the
previews to direct the action, position cameras, find a particular sequence on a video
tape, and so forth. The preview images do not show input effects (see Chapter 6, Input
Effects).
button to repeatedly cycle through five different configurations for
DISPLAY
Standard
+1
( )
SHIFT
Transitions
Full Display
(
SHIFT
Next
+4
( )
SHIFT
NEXT Input Source
Standard — ( +1) Shows preview images for all four input sources and up to
SHIFT
30 different transition options.
Two Channel — (
SHIFT
Previews and two rows of the Transitions menu.
Full – ( +3) Displays only the input source Preview windows, each in a larger
SHIFT
size. Transitions menu not displayed.
Next — ( +4) Displays full-screen image of the NEXT input source. Transi-
SHIFT
tions menu not displayed.
Current — ( +5) Displays full-screen image of the CURRENT input source.
SHIFT
Transitions menu not displayed.
Input Input
Source Source
+2
)
Input Input
Source Source
+2) Shows only enlarged CURRENT and NEXT input source
C D C
HANGING THE ISPLAY ONFIGURATION
Transitions
CURRENT Input Source
47
Two Channel
+2
( )
SHIFT
Current
+5
( )
SHIFT