Power Connector - Videonics MXPro User Manual

22
Chapter 3

Power Connector

WARNING!
The MXPro package contains the required Transformer and Power Cord for the unit.
Power
Adapter
Plug
Transformer
Use only the power cord and transformer provided in the package. Do not use
this power cord and transformer with any other equipment. Failure to observe
these conditions can damage your equipment and void your warranty.
Procedure
To connect the power cord and transformer:
1 Connect the Female Plug on the Power Cord into the Male Socket on the Trans-
former.
2 Connect the Male Plug on the Power Cord to a suitable power outlet.
3
Connect the Power Adapter Plug on the Transformer cord into the Power connec-
tor on the MXPro rear panel.
4
Turn the MXPro Power Switch (located on the right side of the unit) to the ON
position.
Male Socket
Videonics MX-Pro User Guide
Female Plug
Male
Plug
Power Cord