Running The Demo - Videonics MXPro User Manual

12
Chapter 2
Using the Route
Function
This display
indicates the S-
Video (Y/C) and R/L
audio connections
from IN 2 are routed
to Channel B.

Running the Demo

The Route functions ensures that MXPro understands where your input devices are
connected on the rear panel. If you connect S-Video (Y/C) devices to the IN 1, IN 2, IN3,
and/or IN 4 jacks, re-routing is not necessary. Go on to the next section, "Running the
Demo". Otherwise:
¨ After starting MXPro with all devices connected and turned on, press ROUTE to dis-
play the Route screen.
¨ Press LEFT ARROW. Note that the S highlight (for S-Video, or Y/C) under IN 2
moves left to highlight the V (Composite Video) option.
¨ To route other inputs to different channels, press NEXT/X, where X is the channel
to which you want to route. Then repeat the preceding step.
¨ Press ROUTE again to exit from the Route screen.
The Demo gives you a quick look at some of MXPro's important features and assort-
ment of transitions.
¨ Press SHIFT+DEMO.
You should see the two sources alternating, with a variety of transition effects in
between.
¨ Press any key to stop the Demo whenever you want.
Press NEXT/X where X is the channel (A,
B, C, or D) TO WHICH you want to route
the signals. MXPro highlights the
channel you select.
The following instructions explain
how to change the video routing for
channel B from the S-Video (Y/C)
MUTE
connection on IN 2 to the Composite
connection on IN 2.
Videonics MX-Pro User Guide