Freeze And Transitions - Videonics MXPro User Manual

86
Chapter 7

Freeze and Transitions

The preceding examples used the dissolve transition to move between frozen images.
You can use any MXPro transition to move between freezes, with the following excep-
tions:
• MXPro cannot perform a Trailing-type transition TO a frozen image. It releases
the Next source prior to running the transition.
• MXPro can perform a Trailing-type transition FROM a frozen source to a moving
source. However, it loses the freeze once the transition finishes.
• MXPro cannot compress frozen images. If you select a compression effect, MXPro
automatically runs the selected effect without compressing the video; resulting in
a wipe transition.
• To hold frame freezes, press SHIFT+4 (to set the Preview monitor to Preview Next
mode) or SHIFT+5 (to set to Preview Current mode). In any other Preview mode,
a Frame freeze reverts to a Field freeze once the transition begins to run.
Videonics MX-Pro User Guide