Color Neg; Chroma Key; Flip Vertical; Strobe - Videonics MXPro User Manual

Input Effects
C N
OLOR EG
C K
HROMA EY
F V
LIP ERTICAL
S
TROBE
Inverts all colors in the image.
Parameter Values — Zero or one.
0 = Off: 1 = On
1
3
Slows down the picture's video frame rate. Motion appears halting, or jerky
— like that produced by a strobe light.
Parameter Values — Zero through nine. Zero turns off the effect.
Higher values increase the effect. Setting 1, for example, produces the look
of film: setting 2 makes video look like an old movie. All settings, except 1,
temporarily disable strobe during transitions.
Chroma key replaces all occur-
rences of a color in an image with a
different image. In this example, (1)
the block of color in the first image
(the area behind Kong's head) gets
2
replaced with the image of the
Golden Gate Bridge (2). The result-
ing image (3) is Kong superimposed
over the bridge. See Chapter 10,
Chroma Key, for complete details.
Flips picture top-to-bottom.
Parameter Values — Zero or one.
0 = Off: 1 = On
69

Color Neg