Table of Contents
Advertisement
Operating Instructions
Auto Changeover Operation (Single Air Conditioner)
Auto Operation(Multi Air Conditioner)
Healthy Dehumidification Operation
12 Air Conditioner
This operation is basically heating or cooling function of the air
conditioner. But during this operation the controller changes the
operation mode automatically to keep the temperature within
±2°C with respect to the setting temperature.
In this operation, mode is automatically set by the logic based on the current
temperature and connected indoor unit. You can set desired temperature
and indoor fan speed.
Setting Temp. Range : 18~30°C
During Healthy Dehumidification Operation
❏ If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification function.
It automatically sets the room temperature and airflow volume to the best
condition for dehumidification, based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
❏ During the healthy dehumidification function, the fan speed is automatically set
according to the optimization algorithm responding to the current room
temperature status, so that the room condition is kept healthy and comfortable
even in the very humid season.
MODE
MODE
MODE
Hide quick links:
Advertisement
Table of Contents
