Charging The Battery - Savaria PL Owner's Manual

30

Charging the Battery

If the battery charge is low, you will hear a beeping sound and
see a blinking green LED on the lift when pressing a button. The
beeping sound and blinking LED will stop when the button is
released. Charge the battery as soon as possible.
Use ONLY the charger #M920001 provided with the lift.
Using any other charger may result in permanent damage
to the batteries or cause fire, explosion, or injuries.
Do NOT operate the battery charger with a damaged cord
or damaged charger enclosure as this may cause fire or
electrical shock.
1 Plug the charger into the AC wall outlet. The green indicator on the charger
will come on solid.
2 Plug the other end of the charger cord into the lift.
3 The charging indicator on the charger is solid yellow when the battery is
charging and solid green when the battery is fully charged.
4 If the battery is low, it will take approximately 2 hours for a full charge.
Charge the battery fully before using the lift again.
Plug the charger into the lift when the lift is not in use to ensure it is fully
charged for the next use. The lift can be charged for an extended period of time
without damaging either the charger or the battery.
When you need to use the lift again, be sure to unplug the charger before using.
The lift should not remain stored for long periods of time without charging the
battery. Charge the battery at least every month to maximize the life span.
Savaria PL Portable Ceiling Lift Owner's Manual
NOTE
WARNING
Part No. 001052-EN, 03-m12-2019