1. Manuals
  2. Brands
  3. Savaria Manuals
  4. Lifting Systems
  5. ES-125
  6. Owner's manual

Savaria ES-125 Owner's Manual

Hide thumbs Also See for ES-125:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
ES-125
OWNER'S MANUAL
Part No. 000703
08-m12-2009

Advertisement

Table of Contents
loading

Related Manuals for Savaria ES-125

Summary of Contents for Savaria ES-125

  • Page 1 ES-125 OWNER’S MANUAL Part No. 000703 08-m12-2009...

  • Page 3: Emergency Stop

    OPERATION OF THE ES-125 OPERATING THE ES-125 Insert the key and turn it in the operating position on any call/send control (figure 1.0). The key is in the operating position when it can not pulled out. Always take the key out when the unit is not in operation. Apply constant pressure on the appropriate button to call the platform to the landing.

  • Page 4: Platform Controls

    PLATFORM CONTROLS FIGURE 2.0 (The buttons on your unit may differ from these ones shown ) BUTTON EMERGENCY STOP (OPTIONAL) DOWN BUTTON KEY SWITCH Key switch : Needs to be on to activate the operating buttons. Up button : Will move the platform in the up direction. Down button : Will move the platform in the down direction.
  • Page 5 SAFETY DEVICES (see figure 3.0) 1- Underpan sensor (optional) : Located under the platform, will prevent the descent if something obstructs it. 2- Flap sensitive switches (optional) : Located under the platform, will prevent the movement of the platform if something obstructs 3- Arm position switches (optional) : Located at the inside ends of the arms, will stop the platform if the arms are in an intermediate...
  • Page 6 No emergency manual lowering device exists for this model. ES-125 P (unit pulled by a steel cable, public model) It is possible to move the ES-125 P manually with a crank (see figure 4.0). Insert the crank and turn it to move the unit at the desired position to reach the landing.

  • Page 7: Every Six Months

    MAINTENANCE EVERY TWO MONTHS : - Testing of Underpan sensor (optional equipment) Flap sensitive switches (optional equipment) Emergency stops (optional equipment) Platform position switch (folded/unfolded) Arm position switches (optional equipment) Seat position switch (optional equipment) Clean bus lines (if equipped) with grit #400 sandpaper These verifications can be made by the owner.
  • Page 8 Verify if the arms are not in an intermediate position. It should be in an horizontal or vertical position. The platform does not fold or unfold (powerfold option only): Verify that the ES-125 is stopped at one of the landings. Verify that the seat is folded up. The platform moves intermittently: Verify if the bus lines (if equipped), located on the rail, are dirty.
  • Page 9 Dealer’s request and expense. Some parts covered under this warranty may be commercially available from a source close to the job site and Savaria Concord will reimburse Dealer for cost to purchase these items provided that approval is obtained from Savaria Concord’s Technical Support Department in advance.

Table of Contents