Gate Lock; Safety Brake; Emergency Stop Button; Battery Lowering - Savaria M2LIFT-40 Owner's Manual

10
Gate Locks
The WR-500 gate lock keeps the gate locked when the platform is moving and
not at a landing.
Keys are for emergency use only and should always be kept in a safe
place for use by trained personnel only. After use of any emergency
function (access key or manual lowering device), ensure that all
doors/gates are secure and locked. While the emergency function is in
use, DO not leave the area unattended.
Emergency Gate Opening
The gate can be opened manually using the
emergency key provided for the WR-500 lock (Figure 5).
Insert the key into the lock and turn it a half turn
clockwise to unlock the gate. Pull the gate open and
then turn the key a half turn counter-clockwise to
remove it from the lock. DO NOT open the gate if there
is any chance of falling from the platform.

Safety Brake

The motor Safety Brake stops the platform in the
event of a chain failure.
During normal operation, the chain tension keeps the
brake mechanism up so the brake cam does not
interfere with the tower guide rail. If a chain failure
occurs, the brake mechanism activates and stops the
platform.

Emergency Stop Button

Pressing the red Emergency Stop button during travel will stop the lift
immediately and activate the alarm. The Emergency Stop overrides the landing
(call/send) stations. Be sure to pull the Emergency Stop button out to return the
lift to normal operation.

Battery Lowering

In the event of a power failure, press the DOWN button to bring the lift to the
lower level.
M2LIFT Owner's Manual
NOTE
Part No. 001103, 28-m08-2018
Figure 5