Table of Contents
Advertisement
4.
Caller ID
Displays incoming call phone number and name on the LCD (needs Caller ID
service from local telephone company)
5.
Call waiting with caller ID
nd
Displays 2
incoming call information on the same phone line when 1
progress (needs Call Waiting with Caller ID service from local telephone
company)
6.
Name tagging with caller ID
Match the caller ID with the phone book entries; once matched, the LCD screen
will display the name or nickname instead of pure caller ID info (needs Call
Waiting with Caller ID service from local telephone company)
7.
DND (Do Not Disturb, i.e., Silent Ring)
8.
Three Call Logs
a.
Called Log: Stores 10 phone numbers (up to 28 digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b. Received Call Log: 10 entries (14-digit phone number, 14-character names,
and time stamp), needs Caller ID service from local telephone company.
c.
Missed Call Log: 10 entries (14-digit phone number, 14-character names,
and time stamp), needs Caller ID service from local telephone company.
d. Phone numbers and names can be saved into phonebook while in display.
10. Key-guard
11. Dialing Prefix
Up to 14 digits, including pause(s), one access code can be pre-programmed to
be added automatically in front of the dialed number when dialing from call
logs, phonebook, and dial-and-send dialing.
12. Call Hold
a.
Places call on hold
b. Battery Hot Swap: Change battery while call is on hold.
13. Mute
14. Phonebook
a.
90 entries, each stores a phone number or handset ID (up to 28-digit) and
name (up to 14-character)
b. Alphabetically sorted display and search
st
~17~
c.
Dial from display
d. During the stand-by mode, you can enter the phone book by pressing
e.
Phone book transfer via air
i. Transfer specific phonebook to one handset or all registered handsets
call is in
ii. Transfer all phonebooks to one handset or all registered handsets
15. Key tone
a.
Three-level key-tone volume selections (high/low/off)
b. Four key-tone type selections
16. Call timers
Display call time duration for current call during and immediately after the call
18. Call Transfer (Register to PRO base)
a.
Direct Transfer: transfer a telephone call to another handset without
announcement.
Announced Transfer: speak to the destination handset before transferring a
b.
telephone call.
19. Call Conferencing (Register to PRO base)
a.
2-handset and 1-line conferencing.
b.
1-handset and 2-line conferencing.
20. Line Selection (Register to PRO base)
When enabled from the handset menu, a handset user will be prompted to
select from a list of available lines before making an outgoing call.
21. Programmable PBX Options:
a.
Allow user to pre-program the most frequently used PBX feature
along with its feature code into DuraFon which is adjunct to the PBX
system.
b. Up to 9 entries can be saved.
c.
Once the feature and feature codes being programmed, you can
quick perform those functions during the call by pressing
soft key.
22. Base Selection (Register to PRO base)
When enable from the handset menu, a handset user can manually select the
base which is the nearest one with user before making an outgoing call.
scrolling key
~18~
OPTION
Advertisement
Table of Contents
