EnGenius DuraFon UHF User Manual page 24

contain a phone number or handset ID (up to 28 digits) and a
name (up to 14 characters).
Re: For DuraWalkie, each entry can store 2 digits handset ID or
Group ID.
2. To access phonebook, press
MENU
scrolling key when handset in standby mode.
3. To add a new entry:
a. Press ADD soft key.
b. Enter a phone number when LCD prompts "Number?" Use
DELETE soft key to delete the last digit entered. Press
when completed.
c. You will then be prompted to enter a name for the phone
number just entered.
(1) Press SAVE key to enter a phone number without a name. All
records without a name will be placed on top of the list, in the
order they are entered.
(2) To enter the name, press the corresponding keypad number
one or more times according to the order of the character on
the key.
(3) Use DELETE soft key to delete the last character entered. When
completed, press SAVE soft key to confirm your selection.
Notes:
1.
When entering a phone number, the cursor automatically advances to
the next digit field. Use
backward or forward to insert or delete.
2.
When entering a name, the cursor automatically advances to the next
character field if you press a different key for the next character. If you
need to enter consecutive characters from the same key, you can wait
for the cursor to advance or use
cursor backward or forward manually. Also use
the cursor to insert or delete.
3.
By default, all letters are entered in the upper case. Use the
toggle between upper and lower cases.
4.
A "Pause" entry represents a 2.8 second delay in dialing the following
digits, which is useful when calling a sequence of segmented numbers
(e.g., access code, credit card number, auto-attendant entries, etc.)
Pause is entered by pressing the
followed by 2 or or
SAVE
or scrolling key to move the cursor
or scrolling key to move the
or to move
＊
key to
＊
key twice (LCD displays P). Entering
~47~
pause twice (PP) will result in 5.6 seconds pause in the dialing.
4. The entries are alphabetically sorted and stored as a list in an
ascending order (A to Z) from the top of the list.
a. If the phonebook is entered from the menu, the first entry
displayed is from the top of the list.
b. If the phonebook is entered using the
displayed is from the top of the list.
c. If the phonebook is entered using the
displayed is from the bottom of the list.
5. The first line of LCD display shows name and the 2
the phone number. If the phone number is longer than 14 digits,
press OPTION soft key and select Option 3 to view the complete
number.
6. To search for a record:
a. Use
or scrolling key to enter the Phone Book
mode.
b. Press a key that corresponds to the first character of the
name you are looking for.
c. For example, you are looking for "EnGenius", and then press
the number 3 once.
d. Use
or scrolling key to locate the exact record you
are looking for.
7. To erase phonebook entry:
a.
Use or scrolling key or the alphabetical search
method to locate the record to be erased.
b. Press OPTION soft key to enter editing menu.
c. Press 1 to erase the designated phone entry.
d. LCD shown "Are you sure?" Press
your change.
8. To edit phonebook entry:
a.
Use or scrolling key or the alphabetical search
method to locate the record to be edited.
b. Press OPTION soft key to enter editing menu.
c. Press 2 to edit the designated phone entry.
, the first entry
, the first entry
nd
line shows
YES to double confirm
~48~