Table of Contents
Advertisement
23. Repeater Operation (Register to PRO base)
In order to get better range performance for handset to handset calls(intercom
and broadcast), install a repeater and make the calls via repeater is able to
extend the range of handset to handset calls.
Administrator Features (Register to PRO base)
Handsets 10 and 11 are designated administrators. Both have the same authority
to perform base station administrative functions from their handset menu
selections. No password is required.
1. Supports both DTMF and Pulse dialing(For DuraFon PRO only)
a.
From an administrator handset (Handset 10 or 11 ), press MENU-
enter base ID(00–07)-
1
to select Tone or Pulse dialing mode.
b.
Default is Tone dialing.
2.
Administrator programmable Flash key timing(For DuraFon PRO only)
a.
From an administrator handset (Handset 10 or 11), press MENU-
enter base ID(00–07)-
2
to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 300 ms.
c.
The default value (300 ms) works in most areas. Changing this setting
may result in Flash function not working. Change only when you are
certain the new value will work.
3.
Call Transfer to PBX Extension(For DuraFon PRO only)
a.
When the DuraFon PRO is installed behind a PBX system, you can pre-
program the feature code of call transfer function.
b. Need to adjust the Flash time to match your PBX setting.
Re: If loosing administrator handsets (handset 10 and 11), all settings must be
reset (reset the base and re-register all handsets).
9
9
-1-
~19~
Charger Illustration
Spare Battery
Charging Slot
–
1
–
Spare Battery
Charging Indicator
Handset
Charging Slot
Charging
connector
~20~
Advertisement
Table of Contents
