Redial; Receiving A Telephone Call; Receiving An Intercom Call; Ending A Call - EnGenius DuraFon UHF User Manual

Long range dual mode radio phone handset with analog uhf 2-way radio
Table of Contents

Advertisement

Redial

1.
Press REDIAL (Left) soft key.
2.
The LCD shows the last phone number dialed. To dial this number, press DIAL
(Left) soft key.
3.
Use
or
Arrow Key to scroll through the last 10 phone numbers
dialed. Select and press DIAL soft key.
[Note] Intercom numbers (Handset ID) are not stored in the last 10 numbers
dialed log.

Receiving a Telephone Call

1.
When an incoming call arrives, the ringer will ring or vibrate unless the ringer
has been turned off.
2.
If the handset is on the charger cradle (ringer will be temporarily switched to
"Ring" if it has been set to "Vibrate"), lift the handset and start conversation.
3.
If the handset is not on the cradle, press any key (except
soft key) to answer.
4.
During the call, press the
Notes:
1. You can press SILENT (Left) soft key if you choose to ignore
the call. Unlike turning off the ringer (from the handset
menu), the SILENT key operation is valid only for the current
call.
2. If Caller ID service is available, the LCD will display the
incoming call information. If the LCD shows "Private" or
"Unknown", the caller's information may have been blocked
by the caller or the originating phone company.

Receiving an Intercom Call

1.
When an intercom call arrives, the ringer will ring or vibrate unless the ringer
has been turned off. Press
, and the Silent
key, the speakerphone is active.
to answer the intercom call.
~29~
2.
If the handset is on the charger cradle (ringer will be temporarily switched to
"Ring" if it has been set to "Vibrate"), lift the handset and start conversation.
3.
If the handset is not on the cradle, press any key (except
soft key) to answer.
4.
During the call, press the
Notes:
1. The LCD displays the caller's Handset ID.
2. You can press the
SILENT
the call. Unlike turning off the ringer the
valid only for the current call.

Ending a Call

To end a telephone or intercom call, press
cradle.

Adjusting Voice Volume in Phone mode

1.
Voice volume can only be adjusted during a call. It is
used for receiver (earpiece) and speaker in phone.
2.
There are 6 levels of volume selections. Default = 3. Use
or
arrow key to adjust
3.
The new setting remains effective for all future calls
until changed.

Adjusting Volume in Walkie-Talkie

1.
The volume from speaker in walkie-talkie can only be
adjusted by On-Off/Volume knob.
2.
Rotate knob clockwise to increase and counterclockwise
to decrease volume
, and the
key, the speakerphone is active.
(Left) soft key if you choose to ignore
SILENT
key operation is
key or place handset into charger
10
00:00:10
Volume:4
MUTE
10 1
DuraFon PRO
UNHOLD OPTION
~30~
SILENT
HOLD

Advertisement

Table of Contents
loading

Table of Contents