Table of Contents
Advertisement
Call Transfer (Register to PRO base only)
1.
While a telephone call is in progress, you can place the call on hold and
transfer the call.
2. Press
HOLD
soft key to put call on hold.
3. Press
OPTION
soft key to enter feature list for selection.
4. Press number
2
and enter a two-digit Handset IDto call another handset
extension.
a. Un-announced Call Transfer:
Press
END
before the destination handset answers, the call is
automatically transferred to the destination handset.
b. Announced Call Transfer
(1) Speak to the destination handset.
XFER
(2) Press
soft key or the
to the destination handset.
Notes:
1. If the destination handset does not answer after handset paging
timeout, the call is routed back to the originating handset.
2. Above described "Call Transfer" is for DuraFon PRO handset-to handset
call transfers.
3-Way Conferencing (Register to PRO base only)
1.
While a telephone call is in progress, you can place call on hold
and bring in another phone line or another handset for a 3-way
conference.
2.
Press
HOLD
(Right) soft key to put the current call on hold.
3.
Press
OPTION
(Right) soft key to enter selection menu.
4.
3-Way Conferencing with a Second Handset:
a.
Press number
2
and enter a two-digit Handset ID to call
another handset extension.
b. After the second handset answers, press the
END
to end announcement. The call is transferred
CONF
(Left) soft
~39~
key.
c.
Two handsets and one phone line can now talk
simultaneously. Any one party can drop out of the 3-way
conferencing, leaving the remaining two parties still
connected.
5.
3-Way Conferencing with a Second Phone Line:
a.
Press number
1
and enter a phone number to call another
phone line.
b. After the second line answers, press the
c.
One handset and two phone lines can now talk
simultaneously.
I.
If one phone line hangs up, the handset continues
talking to the remaining phone line.
II.
If the handset presses
will be dropped. The handset and the first phone line
continue conversation.
Notes:
1. 3-way conferencing between 3 handsets is not supported.
2. Unlike 3-way conferencing provided by the phone company, 3-way
conferencing involving 2 phone lines will take up two physical lines, leaving
only two lines left available for other handsets. The handset must have access
to a second line.
Base Select (Register to PRO base only )
1.
A handset can manually select the desired base station before
access outbound line.
2.
Press handset
MENU
(Right) soft key.
3.
Press the number
5
, this will enter the handset setting menu.
4.
Press number
3
, handset enters Base Select setting mode.
5
Use
or
arrow to scroll up and down the selection
on/Off.
6.
Make a selection (default =off), and press
CONF
(Left) soft key.
key, the 2nd phone line
SAVE
(Left softkey).
~40~
Advertisement
Table of Contents
