Table of Contents
Advertisement
ii. Press
2
and confirm to clear the three call logs (Called, Received, and
Missed).
e.
Press
5
to edit the name of Custom or Line:
e-1. Press
1
to change the power-up LCD display to show, e.g., customer
name or other greeting message:
e-2. Press
2
to change the name of line, when calls coming, it will indicate
the calls came from which line.
i.
to move the cursor backward or forward to insert (to
Use
or
the left of the cursor) or delete (the character above the cursor, or left
of the cursor if cursor is on the right of the last character).
ii. Enter characters using the Character Table and method discussed in
the Phonebook section.
iii. When finished, press
SAVE
f.
Press
6
to change LCD display contrast:
i.
to scroll through values 1 to 8. Pick one that is most
Use
or
suitable to you. Default = 6.
ii. Press
SAVE
(Left) soft key to save setting.
g.
Press
7
to change the LCD backlight:
i.
to scroll through options: On, Off, and 20 Seconds.
Use
or
Default = 20 seconds, meaning that the backlight on, will turn off after
20 seconds of inactivity.
ii. Press
SAVE
(Left) soft key to save setting.
h. Press
8
to change the Line selection:
i.
to scroll through options: On or Off. Default = Off,
Use
or
meaning that you can not select the other available lines to dial.
ii. Press
SAVE
(Left) soft key to save setting.
i.
Press
9
to change the PBX options:
i. Press
ADD
soft key to edit a PBX feature to be memorized and key in
the name of the PBX features just like editing a phonebook entry.
ii. Press
SAVE
(Left) soft key to save setting.
iii. Press
OPTION
and
1
following by entering PBX options mode, you can
erase the PBX option.
iv. Press
OPTION
and
2
following by entering PBX options mode, you can
edit the PBX option.
v. Press
OPTION
and
3
following by entering PBX options mode, you can
transfer the PBX options to other handset(s).
Re: To transfer PBX Options, both parties have to enter the PBX Option
mode firstly by following below:
For sending party, press
Either press
TX
ALL(left softkey) to transfer all PBX options to
another handset(s).
(Left) soft key to save change.
1
to enter sending mode.
~61~
Or press
TX ONE
(right softkey) to transfer a specific entry to
another handset(s).
Press 2-digit handset ID or group ID, then select all PBX options
or a specific entry to be transferred("00" means all handsets)
During PBX options transferring, LCD shows "Sending", and 2-
digit countdown on the LCD to indicate the numbers of PBX
options which are waiting for sending.
For receiving party, press
When entering the receiving mode, LCD shows "Ready".
Start to receive PBX options, LCD shows "Get PBX options from
Ext. # : x ㎜ x".
When the PBX options is receiving, 2-digit countdown on the
LCD indicates the number of PBX options which are waiting to
be received.
Note:
1. Different PBX makers use different analog codes to control PBX
function, like call transfer, call park, etc.; Please refer to your PBX
maker's manual for this information.
2. Errors may occur in PBX options and phonebook entries transferred
wirelessly due to interference. Please re-enter entry manually if
problems occur with a entry.
j.
Press
0
to change Language:
i.
to scroll through options: English and Portuguese.
Use
or
Default = Portuguese, meaning the LCD display shows in English.
ii. Press
SAVE
(Left) soft key to save setting.
K. Press
#
to set Walkie-Talkie operation
K.1 Press 1 to enable/disable PTT key for UHF walkie-talkie(WT)
i. Press
On
(Left softkey) to turn on the UHF WT function which could
receive and transmit the broadcast via UHF band.
ii. Press Off(Left softkey) to turn off the UHF WT function. The PTT key is
used for digital band.
K.2 Press 2 to turn Broadcast On/Off
i. Press
On
(Left softkey) to turn on the broadcast function (including the
broadcast of handset to handset and base to handset).
ii. Press Off(Left softkey) to turn off the broadcast function
2
to enter receiving mode.
~62~
Advertisement
Table of Contents
