Table of Contents
Advertisement
4
It will first show Line 1 and line status. If you wish to dedicate line 1 to a
specific handset or group, you need to press OK. To dedicate lines 2-4 use
or
scrolling key on the keypad.
5
After choosing a line, it will show
to enter the handset ID or group ID for extension number. If you choose NO,
it will go back to Line Setting menu.
Notes:
1. When entering Line Dedication setting, it will show line and status. If line is
already dedicated to a specific handset or group, it will show the handset or
group ID behind the line. If line isn't dedicated to a specific handset yet, it will
show "ALL HS" behind the line.
2. When setting Line Dedication, make sure the handset or group ID is correct to
avoid losing calls sent to an DuraWalkie handset or invalid ID.
3. Handsets dedicated to a port will also receive calls from non-dedicated line as
well as the handset's dedicated line. Use Line Dedication for a group on other
lines to further manage calls
Line Selection (Register to PRO base only)
1.
Press
MENU
-
5
-
8
while the phone is in standby to enter Line Select menu.
2.
Use
or
to switch between
3.
If set to On, when pressing
pressing
key, the handset LCD display will show "Select Line" followed by
available lines (1~4). Select from one of the available lines i.e. press
select line 1 and press
2
to select line 2.
4.
This feature is also supported when selecting a second line during call
conferencing.
Change System and Line Settings by Administrator (Register to PRO
base only)
1. There are two system parameters that can be changed by the administrator:
clear (de-register) handset ID and set the next handset ID to be assigned by the
base.
YES
and NO, when choosing YES, you need
On
and Off, default = Off.
or entering a phone number followed by
~45~
2. From an administrator handset (Handset 10 or 11), press MENU(Right) soft key.
3. Press number
4. Press number
a.
Dial tone:
Press
choose "Tone" or press
b. Flash time:
Press
choose from.) For example, press
c.
Line Detect:
Press
choose "On" or press
d. Clear Handset ID
Press
for later assignment.
e.
Set next Handset ID to be assigned:
Press
that will be given out by the base to the next handset registering with the
base.
5. Press number
a.
Enter Base ID(00~07) to access base.
b. Press
i. Press handset OFF(Right softkey) to disable broadcasting function;
ii
c.
Press
i
ii
Line Dedicate confirm:
1
to
Press NO(Right softkey) to go back Line Setting Menu.
Press YES(Left softkey) then enter extension number.
Note:
De-registration by the administrator will disable a handset's ability to use the
base station to make or receive phone calls. This also frees up the ID for future
registration
Phonebook Operations (Register to PRO base only)
1. You can store up to 90 entries in the phonebook. Each entry can
9
, this will enter the administration menu.
1
, handset enters System setting menu.
1
to set up the dial tone to be either "Tone" or "Pulse." Press
2
to choose "Pulse."
2
to set up the flash time from 100ms, 200ms, to 900 ms (9 levels to
2
if the desired flash time is 200ms.
3
to set up the line detect to be either "On" or "Off." Press
2
to choose "Off."
4
and enter a two-digit Handset ID when prompted to clear this ID
5
and enter a two-digit Handset ID when prompted. This is the ID
2
, handset enters Line Setting menu.
1
to enter Broadcast setting
Or press handset ON(Left softkey) to enable broadcasting function
2
to enter Line dedication setting
Select base's line and press handset CHANGE(Right softkey)
~46~
1
to
1
to
Advertisement
Table of Contents
