Table of Contents
Advertisement
When you select Custom, a screen in which you can specify the paper size appears. Select a Unit,
then enter the Width and Height, and then click OK.
Important
• Custom cannot be selected depending on the Select Source setting.
Note
• Click Defaults to restore the specified settings to the default settings.
Resolution
Select the resolution of the item to be scanned.
The higher the resolution (value), the more detail in your image.
Resolution
Note
• For Resolution, only 300 dpi or 400 dpi can be set.
Document Scan Orientation Settings...
This appears when you select ADF for Select Source.
Click to display the Document Scan Orientation Settings dialog in which you can set the orientation
and binding side of the documents to be scanned from the ADF.
Important
• Binding Side cannot be specified when scanning only the front side of each document.
Scan both sides when scanning from the ADF
This appears when you select Document (ADF/Platen) for Select Source. Scans both sides of the
documents placed on the ADF.
Image Processing Settings
Click
(Right Arrow) to set the following.
648
Advertisement
Table of Contents
Troubleshooting
