Table of Contents
Advertisement
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters.
• For security reasons, we recommend you use 6 and more alphanumeric characters.
7. When the completion message is displayed, select OK.
Setting Standard User Password
For restricting the function for standard user, enable the standard user mode and set a standard user
password by following the steps below.
1.
Display printer status on web browser.
2. Select Security.
The menus are displayed.
3. Select Standard user mode settings.
4. When the confirming message is displayed, select Yes.
5. Enter a password, and then select OK.
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters.
• For security reasons, we recommend you use 6 and more alphanumeric characters.
6. When the completion message is displayed, select OK.
346
Advertisement
Table of Contents
Troubleshooting
