Canon MB5400 Series Online Manual page 303

Root cert. thumbprint (SHA-256) XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
("XX" represents alphanumeric characters.)
• Other settings
Important
• You cannot select the items below when Disable LAN is selected for Change LAN.
◦ Direct connection settings
Setting items are available when you connect a device to the printer.
Important
• You can select these setting items only when Activate direct connect. is selected for Change
LAN.
■ Update SSID/password
Selecting Yes updates the identifier (SSID) and password for direct connection.
■ Change device name
Changes the printer's name displayed on a Wi-Fi Direct compatible device.
■ Connection request confirmation
Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is
connecting the printer.
Using Machine with Direct Connection
◦ Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, Windows 8, Windows 7, and Windows Vista).
■ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, Windows 8, Windows 7, and Windows Vista.
■ Optimize inbound WSD
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
303