Table of Contents
Advertisement
If you use this function in combination, select the two-sided copy setting for ADF duplex scan and 2-
sidedPrintSetting and select the stapling side of print paper on the Print settings screen.
For more on two-sided copy function:
Two-Sided Copying
When Loading the Original on the platen glass:
• Before scanning:
When the preview function is activated, the printer starts pre-scanning before scanning the original.
When pre-scanning is finished, the screen below (preview screen) appears on the touch screen.
A. Tap to rotate the original by 180 degrees.
B. Tap to start scanning the original.
C. Tap to rescan the original.
• After scanning:
The screen below appears after scanning each sheet of original.
A. Tap to start scanning the original.
Remove the sheet of original from the platen glass after scanning and load the next sheet on the
platen glass and tap Scan.
B. Tap to start copying the original already scanned.
Note
• You can add the copying job while printing.
Adding Copying Job (Reserve copy)
571
Advertisement
Table of Contents
Troubleshooting
