Canon MB5400 Series Online Manual page 851

TX REPORT/ER- Either of these reports is printed after each fax transmission.
ROR TX REPORT
• At the time of purchase, ERROR TX REPORT is set to be printed only when a transmis-
• MULTI TRANSMISSION REPORT is printed after sequential broadcasting of a document.
• If an error occurs when you send a fax, the error number is printed on ERROR TX RE-
MULTI TRANSMIS- This report is printed after sequential broadcasting of a document.
SION REPORT
Confirms whether the transmission to all the recipients has been completed successfully.
The procedure to print and the error number is same as TX REPORT.
RX REPORT This report is printed after each fax reception.
• At the time of purchase, the printer is set so that RX REPORT is not printed at all.
• If an error occurs when you receive a fax, the error number is printed on RX REPORT
MEMORY CLEAR Lists the deleted faxes in the printer's memory if the faxes stored in the printer's memory are
REPORT deleted by a power failure or unplugging the power cord.
When the printer is turned on, The power cord has been unplugged and unsent/received
docs in memory have been lost. Load paper and tap [OK] to print a list of the lost docs.
is displayed on the touch screen. MEMORY CLEAR REPORT is printed by tapping OK on the
touch screen.
Printing Report or List
This section describes the procedure to print the report or the list manually.
Print the following report or list manually.
• ACTIVITY REPORT
• Directory list (RECIPIENT TELEPHONE NUMBER LIST/GROUP DIAL TELEPHONE NO. LIST)
• USER'S DATA LIST
• MEMORY LIST
• REJECTED NUMBER LIST
• CALLER HISTORY
sion error occurred.
You can set the printer to print TX REPORT each time it sends a document, or disable
printing of the report by selecting TX report in Auto print settings under FAX settings.
You can also specify the print setting so that the first page of the fax is printed along with
the report.
Auto print settings
Note
• The first page of the fax is not printed in color transmission.
PORT (there are some errors for which the cause is also printed).
For details on the error number, see
You can set the printer to print RX REPORT each time it receives a document, or only
when an error occurs by selecting RX report in Auto print settings under FAX settings.
Auto print settings
(there are some errors for which the cause is also printed).
For details on the error number, see
Errors When You Send
Errors When You Receive
851
Fax.
Fax.