Table of Contents
Advertisement
Chapter 6 Application Examples
This chapter unfolds a further description on main features of the oscilloscope by giving eleven
simplified application examples for reference to help solve your own test problems.
1.
Taking simple measurements
Using AUTOSET
Using the Measure menu to take auto measurements
2.
Taking cursor measurements
Measuring ring frequency and ring amplitude
Measuring pulse width
Measuring rise time
3.
Analyzing input signals to eliminate random noise
Observing a noisy signal
Eliminating random noise
4.
Capturing a single-shot signal
5.
Using X-Y mode
6.
Triggering on a pulse width
7.
Triggering on a video signal
Observing triggers on video fields and video lines
8.
Using Slope Trigger to capture a particular slope signal
9.
Using Overtime Trigger to measure a long pulse signal
10. Using math functions to analyze waveforms
11. Measuring data propagation delay
6.1 Example 1: Taking Simple Measurements
When you want to observe an unknown signal in a certain circuit without having its amplitude and
frequency parameters, you may use this function to take a fast measurement on the frequency,
period and peak-to-peak amplitude of the signal.
Follow the steps below.
1.
Set the switch on the oscilloscope probe to 10X;
2.
Push the CH1 MENU button and set the Probe option attenuation to 10X;
DSO5000 Series Digital Storage Oscilloscope User Manual
Application Examples
50
Advertisement
Table of Contents
