Table of Contents
Advertisement
Getting Started Guide
Chapter 3 Getting Started Guide
3.1 Installation
To keep proper ventilation of the oscilloscope in operation, leave a space of more than 5cm away
from the top and the two sides of the product.
3.1.1Power Supply
Use a power supply that delivers 90 to 240 V
, 45 to 440 Hz.
RMS
3.1.2Power Cord
Use only power cords designed for this product. Refer to
8.2 Accessories
for specific standards.
3.2 Functional Check
Follow the steps below to perform a quick functional check to your oscilloscope.
3.2.1Power on the oscilloscope
Plug in the oscilloscope and press the ON/OFF button. Then push the DEFAULT SETUP button.
The default Probe option attenuation setting is 10X.
The Default Setup button
DSO5000 Series Digital Storage Oscilloscope User Manual
6
Advertisement
Table of Contents
