Cursor; Display - Hantek DSO5000BM Series User Manual

corresponding menu.

5.5.5CURSOR

Push the CURSOR button to display the Cursor Menu.
Options Settings
Type Off
Voltage
Time
Source CH1
CH2
MATH
REFA
REFB
Select Cursor S
E
Delta Display the
difference
(delta)
between the
cursors.
Moving Cursors: Press the key near Select Cursor to select a cursor and turn V0 to move it.
Cursors can be moved only when the Cursor Menu is displayed.
Time Cursor

5.5.6DISPLAY

The waveform display is affected by settings of the oscilloscope. A waveform can be measured
DSO5000 Series Digital Storage Oscilloscope User Manual
Comments
Select a measurement cursor and display it.
Voltage measures amplitude while Time measures time and
frequency.
Select a waveform to take the cursor measurement.
Use the readouts to show the measurement.
S indicates Cursor 1. E indicates Cursor 2.
A selected cursor is highlighted, which can be moved freely. Both
cursors can be selected and moved at the same time. The box
behind the cursor displays the location of the cursor.
Display the measurement in the box under this option.
Voltage Cursor
42
Basic Operation