Acquire - Hantek DSO5000BM Series User Manual

Positive Width
Negative Width
Off
Use the knob V0 or the functional keys F3, F4 to select the type of measurement.
Taking Measurements: For a single waveform (or a waveform divided among multiple
waveforms), up to 8 automatic measurements can be displayed at a time. The waveform channel
must stay in an 'ON' (displayed) state to facilitate the measurement. The automatic measurement
can not be performed on reference or math waveforms, or in XY or Scan mode.

5.5.3ACQUIRE

Push the ACQUIRE button to set the acquisition parameter.
Options
Category Real Time
Equ-Time
Mode Normal
(Real Time) Peak Detect
Average
Averages 4
DSO5000 Series Digital Storage Oscilloscope User Manual
Measure the time between the first rising edge and the next
falling edge at the waveform 50% level.
Measure the time between the first falling edge and the next
rising edge at the waveform 50% level.
Do not take any measurement.
The readouts in big font size on
the menu are just results of the
corresponding measurements.
Settings
Acquire waveforms by real-time digital technique.
Rebuild waveforms by equivalent sample technique.
Acquire and accurately display most waveforms.
Detect glitches and eliminate the possibility of
aliasing.
Reduce random or uncorrelated noise in signal
display. The number of averages is selectable.
Select the number of averages by pressing F3 or F4.
Basic Operation
Comments
39