Save/Recall - Hantek DSO5000BM Series User Manual

UTIILITY: Displays the Utility menu.
CURSOR: Displays the Cursor menu.
DISPLAY: Displays the Display menu.

5.5.1SAVE/RECALL

Press the SAVE/RECALL button to save or recall oscilloscope setups or waveforms.
The first page shows the following menu.
Options Settings
Waveforms
Source CH1
CH2 off
MATH off
REF RefA
RefB
Operation Save
Ref on
Ref off
Press 'Next Page' to recall the following menu.
Options Settings
Setups
Operation Flash memory
Source USB disk
Memory 0 to 9
Operation Save
Recall
See below for waveform menus.
DSO5000 Series Digital Storage Oscilloscope User Manual
Select a waveform display to store.
Select the reference location to store or recall a waveform.
Save the source waveform to the selected reference location.
Display or remove the reference waveform on the screen.
Comments
Store the current setups to the USB disk or the memory of the
oscilloscope.
Specify the memory location in which to store the current waveform
settings or from which to recall the waveform settings. Use the V0
knob to select.
Complete the saving operation.
Recall the oscilloscope settings stored in the location selected in the
Setup field. Push the Default Setup button to initialize the oscilloscope
to a known setup.
Comments
37
Basic Operation