Menu And Option Buttons - Hantek DSO5000BM Series User Manual

Mode
Normal
Overtime
Coupling
HF Reject
LF Reject
Holdoff: To use Trigger Holdoff, push the HORIZONTAL Menu button and set the Holdoff Time
option by pressing F4. The Trigger Holdoff function can be used to generate a stable display of
complex waveforms (such as pulse trains). Holdoff is the time between when the oscilloscope
detects one trigger and when it is ready to detect another. During the holdoff time, the
oscilloscope will not trigger. For a pulse train, the holdoff time can be adjusted to let the
oscilloscope trigger only on the first pulse in the train.
Trigger Level
Indicates Trigg
er Points

5.5 Menu and Option Buttons

As shown below, these six buttons at the top of the front panel are used mainly to recall relative
setup menus.
SAVE/RECALL: Displays the Save/Recall menu for setups and waveforms.
MEASURE: Displays the Measure menu.
ACQUIRE: Displays the Acquire menu.
DSO5000 Series Digital Storage Oscilloscope User Manual
Auto
t Press F5 to select Overtime option and adjust V0 to set the
time.
AC Selects the components of the trigger signal applied to the
DC trigger circuitry.
Acquisition Interval
Holdoff
Acquisition Interval
Holdoff
36
Basic Operation