Xerox WorkCentre 7220 User Manual page 252

2016 xerox connectkey technology color multifunction printer
Hide thumbs Also See for WorkCentre 7220:
Table of Contents

Advertisement

Troubleshooting
3.
Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
4.
Remove the jammed staples by pulling them in the direction shown.
5.
Hold the tabs on both sides of the staple cartridge and insert it into the original position in the
finisher.
Note:
If you have trouble inserting the cartridge, ensure that the staples are positioned correctly in
the cartridge.
Note:
The booklet maker uses two staple cartridges. Booklet stapling requires that both staple
cartridges contain staples.
6.
Starting at Step 2, repeat the procedure for the other staple cartridge.
7.
Close the finisher side cover.
®
252
Xerox
WorkCentre
User Guide
®
7220/7220i/7225/7225i Color Multifunction Printer

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 7220iWorkcentre 7225Workcentre 722i

Table of Contents