Troubleshooting - Strong srt 24hx4003 User Manual

Led tv with dvb-t/t2/c/s/s2
Table of Contents

Advertisement

English
Repeat
Info
Rotate
Zoom In/Zoom Out
Move View
NOTE:

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for the
problem you are experiencing. If the TV does not work properly after checking it, please contact your local
service line or STRONG dealer. Alternatively you can send a support mail via our website www.strong.tv.
Problem
No picture,no sound
No colour
The remote control
does not work
No picture, normal
sound
Normal picture, no
sound
Unorderly ripples on
the picture
Highlight the icon and press ENTER. You can select 3 different modes: None
to disable the function, 1 to repeat one track only and All to repeat the entire
list once it is finished.
Highlight the button and press ENTER to check the information of the shown photo.
Highlight the icon in the menu bar and press ENTER to rotate the picture 90
degrees clockwise or counter clockwise.
Highlight the icon on the menu bar and press ENTER to zoom in or zoom out
of the image.
When the image is magnified, use this function for convenient check.
Highlight this icon, press ENTER, then press t up q to move the image.
The move function
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make sure it is working or
turned on.
3. The power plug is in bad contact with the outlet
4. Check the signal source.
1. Change the colour system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be received.
1. Change the batteries.
2. The batteries are not installed correctly.
3. Main power is not connected.
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
1. Press the volume up button to increase the volume.
2. The volume is set to mute, press
3. Change the sound system.
4. Broadcasting failure may happen.
It is usually caused by local interference, such as cars, daylight lamps and hair
driers. Adjust the antenna to minimize the interference.
is only available when the image is enlarged.
Possible cause and solution
to restore the sound.
17

Advertisement

Table of Contents
loading

Table of Contents