Page 1
UHD Smart Android TV with DVB-T2/C/S2 SRT SRT 43UC6433 SRT SRT 50UC6433 User Manual Gebruiksaanwijzing Bedienungsanleitung Instrukcja obsługi Manuel utilisateur Manual do Utilizador Manual del Usuario Manual de Utilizare Инструкции за употреба Uputsvo za upotrebu Uživatelská příručka Používateľská príručka Korisnički priručnik Navodila za uporabo Használati útmutató...
Page 4
Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Teinfaltstraße 8/4.Stock A-1010 Vienna, Austria Email: support_at@strong.tv 22 Feb 2021 12:05...
Page 5
Hereby, STRONG declares that the devices 43UC6433, SRT 50UC6433 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
To obtain the best performance and safety, please read this manual carefully. Please keep this manual for future reference. TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 2.0 INSTALLATION 2.1 Default PIN code: Access to the LiveTV app to set parental control 2.2 Front panel 2.3 Rear panel 2.4 Remote control...
1.0 INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety ...
WEEE Directive Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers 2.3 Rear panel Fig. 3a NOTE: The graphics are for representation only. 1. pq Scans up/down through the channel list. Within the menu system, the buttons operate with equal function of the pq buttons on the remote and adjust menu controls.
13. CI Insert a Conditional Access Module (CAM). 14. HEADPHONE Headphone or Earphone audio output, speakers will be muted when earphone is plugged in and headphone selected. NOTE: If the TV turns off when you plug a cable to any connector, just turn it on again.
Do not place the remote control under direct sunlight which will cause deformation of the unit by heat. When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor.
Page 12
Select your preferred Tuner Mode Satellite or Antenna/Cable. To install channels for terrestrial or cable broadcasting please select Antenna/Cable and choose required type. It is possible to skip scanning and perform it later.
To install channels for satellite broadcasting select Satellite and perform required settings according to your actual satellite system configuration. It is possible to skip scanning and perform it later. Refer to Chapter 5.1 for more information for TV channel installation. To complete installation follow the instruction on the screen.
To access Home screen and exit from any active application, press button on the remote control unit (RCU). Use t u and pq to move around and OK to enter the option or application. 4.1 Inputs TV has such possible inputs or sources: TV or Channels, Composite, HDMI 1, HDMI 2 and HDMI 3. To access to this option, select Inputs item on Home screen or press INPUT button on RCU.
Page 15
Wireless, using the internal wireless and your home wireless network. NOTE: To access the Internet, you must subscribe to a highspeed broadband Internet service with your Internet service provider. NOTE: Instructions below are just the usual ways to connect your TV to a wired or wireless network.
To connect to a wireless network: 1. Ensure you have: 2. A router broadcasting a 2.4GHz wireless signal A highspeed Internet connection Select your Wi-Fi network from the Available networks list and enter password for connection. 3. Use other options of menu to configure the connection (if required). Please refer to chapter 6 to read more about Smart features of your TV.
Page 17
For Tuner(DTV) source will start same procedure of channel installation, as for FTI. Select Tuner Mode as Satellite or Antenna/Cable and fallow instructions on screen. For more details please refer to Chapter 3. For Tuner(ATV) source system start scanning for analog or cable TV channels from connected antenna. It is possible to skip scanning - just select Skip Scan item.
Page 18
After installation of new channels completed, confirm finish of it with FINISH item. Select Done on source screen to exit from procedure. Way 2 - through Settings menu from Channel chapter This is more universal procedure to add channels. Here also possible to defile more options for channels.
Channels This chapter is for channel installation (add/update or re-scan satellite, for manual tuning of channels) and channel management (skip, sort, move or edit channel in list or clear channel list). Channel Installation Mode This chapter is for selecting source for channel installation and performed. Available options are Antenna, Cable or Satellite.
Some helpful features for comfortable watching. Changing channels Following ways are possible for changing channels: Via direct access using the 0~9 buttons. Via the pq or CH+/CH- buttons. Via the channel list using OK and pq buttons. Use COLOUR buttons in the list to move ...
Page 21
Source will call same menu of Inputs, as described above. Refer to Chapter 4.1 for more information. Picture Mode propose such options for moving pictures quality: Standard (as default} and User, Vivid, Sport, Movie, Game, Energy Saving. Select for most acceptable for you picture quality. Display Mode propose such options for Display aspect ratio: Automatic (as default} and Full, Super Zoom, Unscaled, 4:3, Movie expand 14:9, Movie expand 16:9.
It contains such items: Add to My Favorites, Program Guide, CH+ (New Channels Available). Add to My Favorites allows to add or remove current channel to/from Favorite channel list. Heart in RED color meaning, that selected channel included into Favorite channel list. Program Guide gives access to EPG.
7.1 Settings main menu Main features, like network connection, channel installation, accounts and other, are available from first screen of setting menu. Here you will get some system suggestions, manage your accounts (Accounts & sign-in), your applications (Apps), defining parameters for permissions, special access and Security & restrictions options.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
10. This TV may not support some multimedia files changed and upgraded as the change of the encoding format or other technical aspects advances. 8.2 Multimedia Player To playback media files like to view videos and movies, play music, show photos and pictures and read text files from your USB storage devices recommended to use built-in Multimedia Player (also shown on icon like MMP).
Page 26
Press OK to confirm selection The screen will show: On the left part of the screen: type of selected media and brief information about selected file. If file paused or continue playing in small screen, it will also be shown here. On the right part of the screen: the content of connected USB device, with folders and files.
During playback you could use multimedia buttons on your RCU or use on-screen commands, available from menu by button. NOTE: By choosing one of the media types, for example Video, the folders inside will display only compatible media files and no other files of other types. 8.2.1 Play videos Select icon Video from Multimedia type selection page and select file for playback.
select sound tracks (if available) Sound Tracks Last Memory to switch off or remember the timestamp for continue if playback of this file was stopped but was not run to an end Jump Time enter the timestamp, from which playback should be continued RCU multimedia buttons usage: to play or pause the playback to stop playing...
INFO display detailed information about file 8.2.3 Play music Select icon Audio from Multimedia type selection page and select file for playback. To get access to control playback during playback press to display/exit the menu. Available options: to play or pause the playback Play/Pause Repeat select repeat mode for playback...
NOTE: This menu only shows supported files. Files with other file extensions are not displayed, even if they are saved on the same USB storage device. An over-modulated mp3 file may cause some sound distortion during playback. This TV supports lyrics display (in English).
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www. strong.tv.
Again, turn on the TV. plugging a cable into any connector NOTE: If the problem persists after these solutions, please contact your local support centre or send a support mail via our website www.strong.tv. 10.0 SPECIFICATIONS Audio Audio Output: 2 x 10 W...
Page 33
50”: 10.3 kg Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG,...