Table of Contents
Advertisement
Quick Links
SMART ANDROID TV with DVB-T2/C/S2
32HD5553 – HD
43UD7553, 50UD7553, 55UD7553 – UHD
Bedienungsanleitung
Manuel d'utilisation
Manuale utente
Manual del usuario
Manual do utilizador
Használati útmutató
Uživatelský manuál
Brugervejledning
Brukerveiledning
Gebruiksaanwijzing
Användarhandbok
Korisnički priručnik
Ръководство на потребителя
Посібник користувача
Advertisement
Table of Contents
Related Manuals for Strong 32HD5553-HD
Summary of Contents for Strong 32HD5553-HD
- Page 1 SMART ANDROID TV with DVB-T2/C/S2 32HD5553 – HD 43UD7553, 50UD7553, 55UD7553 – UHD Bedienungsanleitung Brugervejledning Manuel d’utilisation Brukerveiledning Manuale utente Gebruiksaanwijzing Manual del usuario Användarhandbok Manual do utilizador Korisnički priručnik Használati útmutató Ръководство на потребителя Uživatelský manuál Посібник користувача...
- Page 2 0850 15 05 50 +34 91 119 61 76 +386 1 828 08 58 support_fr@strong.tv support_ua@strong.tv +385 1 344 57 66 +380 (44) 238 61 50 Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Teinfaltstraße 8/4.Stock A-1010 Vienna, Austria Email: support_at@strong.tv...
- Page 3 Hereby, STRONG declares that the devices 32HD5553, 43UD7553, 50UD7553, 55UD7553 are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.strong.tv/en/doc Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
-
Page 4: Table Of Contents
TABLE OF CONTENT 1. INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 2. INSTALLATION 2.1 Password setting: 2.2 Front panel 2.3 Rear panel 2.4 Remote controls 2.5 Installing the batteries 2.6 Using the IR remote controls 3. FIRST TIME INSTALLATION 3.1 Channel installations for cable 3.2 Channel installations for Antenna 3.3 Channel installations for Satellite... -
Page 5: Instruction
1. INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus. -
Page 6: Accessories
the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty. 1.3 Accessories 1x installation instructions 1x Safety Instructions/Warranty Cards 2x remote controls* 2x AA batteries 2x AAA batteries * It is possible to pair only one Remote Control, however the second remote control can still be used in the traditional way without a Bluetooth connection as the first one. -
Page 7: Rear Panel
NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers 2.3 Rear panel Fig. 3a NOTE: The graphics are for representation only. 32FD5553 1. LAN Connect to your Internet router to access the internet/apps. 2. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console. - Page 8 43UD7553 1. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby Audio support.
-
Page 9: Remote Controls
7. USB 2.0 2x USB 2.0 port. 8. CI Insert a Conditional Access Module (CAM). 9. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your TV to play videos on your TV screen. 10. - Page 10 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3. Navigate the menu. 4. OK Confirm the selection. 5. Press to go back to previously viewed channel. In menu: Back to previous menu. Enter the home desktop.
-
Page 11: Installing The Batteries
Second RCU is quite big and traditional. It is only IR and has complete list of buttons to control your TV. 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3. -
Page 12: Using The Ir Remote Controls
• Do not place the remote control under direct sunlight which will cause deformation of the unit by heat. • When the remote sensor is under direct sunlight or strong lighting, the remote control will not work. If so, please change the lighting or TV's position, or operate the remote control closer to the remote sensor. - Page 13 Step 2 Press and key simultaneously, while poin ng to the TV bo om within the distance of 1 meter at least 3 seconds. Release your finger when the indicator light (red) of the remote flashes. Press and - key simultaneously, while pointing to the TV bottom within the distance of 1 meter at least 3 seconds, Release your finger when the indicator light (red) of the remote flashes.
-
Page 14: Channel Installations For Cable
Step 5 Password Please set password. Input password “0000” is invalid. Password setting Step 6 Tuner Mode Please select Antenna your tuner mode: Cable Satellite To install channels for terrestrial, satellite or cable broadcasting please select Antenna, Cable or Satellite and choose required type of channels Digital, Analogue. - Page 15 Select the operator You can select only Ziggo one operator from the following list : Others Select one operator from the following list, or select Other if you don't have a predefined operator or it is different from those listed. Once done press OK to continue. Note: Not all countries have predefined operators.
-
Page 16: Channel Installations For Antenna
In the next step the channel scan started and will take some minutes to complete. Scanning Analog Channels: 0 The channel scan Digital Channels: 0 may take a while to complete. Progress: 7% 3.2 Channel installations for Antenna Tuner Mode Please select Antenna your tuner mode:... -
Page 17: Channel Installations For Satellite
Channel scan First, please connect the cable. Digital and analog channels Star the channel scan now? If you skip this step, Only analogue channels the channel scan could be performed in Menu. Only digital channels Skip scan First step is to connect the Antenna cable. Then you must start the channel scan. You can choose between Digital and analogue channels, Only analogue channels or Only digital channels. - Page 18 Satellite installa on Do you want Start to start satellite channel installa on? Press OK to start with the satellite channel installation. Antenna type Next More By selecting Next you go to the Select the Operator page, while by selecting More you access the Satellite antenna type page if it is necessary to set the DiSEqC or Unicable.
- Page 19 LNB list Next Astra4A/SES5 5E Eutelsat 7E Off Eutelsat 9E Off Hotbird 13E Off With you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the submenu that allows you to activate or deactivate the selected satellite and to set its various parameters. After all settings have been made, select 8 to continue.
-
Page 20: Home Screen
4. HOME SCREEN The Home screen is the main screen of this model of TV. It divided on few zones and lines and contains - Search line with possibility to enter text to search information or content, related with this text. - Notification corner, which provide information about system notifications and messages. -
Page 21: Network & Internet
4.2 Network & Internet Connection to internet allows to install and use internet applications (i.e. You Tube, Netflix, etc.) and to enjoy of other advantages of Smart TV. Access to the part for network and internet connection is through chapter Network & internet of Settings menu or through quick access panel on Home screen. -
Page 22: Live Tv Usage
Note: The graphics are for representation only. To connect to a wired network 1. Ensure you have: - An Ethernet cable long enough to reach your TV - A router or modem with an available Ethernet port - A highspeed Internet connection 2. -
Page 23: Channel Installation
NOTE: Please note, that you can’t watch anything, if there are no channels scanned and installed. 5.1 Channel installation If the channels were not tuned during the first installation, it is still possible to do so later, by accessing the LIVE TV application available on the HOME screen. -
Page 24: Electronic Program Guide (Epg)
Info Banner While watching TV you can press INFO button to get information about current / next program and event on broadcasting and also some other useful information about it*. *Event information is displayed when available. Availability depends on the broadcast. 5.3 Electronic Program Guide (EPG) EPG stands for Digital Electronic Program Guide. -
Page 25: Smart Tv Possibilities
TV op ons Inputs Picture Sound Inputs allows you to select the source to be displayed. The available sources are: - Antenna: to enable the display of channels from the digital terrestrial signal. - Cable: to enable viewing of channels from the cable signal. - Satellite: to enable viewing of channels from satellite signal. -
Page 26: System Settings
Using Google account give you access to applications and games, movie and music market of Google Play Store. Here you could search, select and install some useful utilities or games, applications for IPTV content, for watching streaming video and music content, another player for Multimedia, receive actual weather information and other. -
Page 27: Multimedia
1. Some USB storage devices may not be compatible to operate smoothly with this TV. 2. Back up all the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility. -
Page 28: Play Videos
Search Home Discover Apps Note: If, for any reason, you do not want to use built-in Smart Player application, you could enter to Google Play Store and install any of available media players (i.e. MX Player, VLC Player, etc.). Note: Support (or non-support) of Multimedia files depend not only on your TV, but also on application, which will be used for playback. - Page 29 007-Skyfall 00:03 Pause Menu Playlist 00:46 Additional useful keys: OK to play or pause the playback. for rewind backward/forward the file. to access the Menu. to display the other video files present in the directory. INFO button to get more information about the file. Menu Picture >...
-
Page 30: Browse Photos
8.2.2 Browse photos Select Photo from Multimedia type selection and choose the file from which the slideshow has to start the playback. Press experience more content Firenze 1 (4204x2797).jpg 16/64 To get access to control playback during playback press OK button to display the menu or button to display more content. -
Page 31: Troubleshooting
Before calling a service technician, review following information for possible causes and solutions for the problem you are experiencing. If the TV does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively, you can send a support mail via our website www.strong.tv. Problem... - Page 32 Satellite dish is too small, trees or buildings in path. Change to a larger dish or change position of dish. d) Signal is too strong, dish is oversized. Connect a signal attenuator to the LNB input. Ask a local satellite specialist for advice.
-
Page 33: Specifications
10. SPECIFICATIONS Audio Audio Output: 32”: 2 x 8 W 43”/50”/55”: 2 x 10 W Video Channel coverage: DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz DVB-C: 113-858 MHz DVB-S2: 950 MHz-2150 MHz System: DTV: DVB-T2, DVB-S2, DVB-C ATV: PAL/SECAM (BG/DK/1) AV: PAL, NTSC, SECAM Connectors 32”... - Page 34 Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals. STRONG, its manufacturing...