Table of Contents
Advertisement
4.0 PERSONAL VIDEO RECORDING
Important notes
For any type of recording with this TV, you must have connected an external device to the
„
„
USB port at the back of the TV to record onto.
The USB device must be FAT32 format.
„
„
When you are using the USB device to record on this TV for the first time, we suggest
„
„
formatting the USB device on the TV before you start the recording.
Make sure you are watching a DTV programme.
„
„
Use a high-quality mobile device to record HD programmes, otherwise the videos will be
„
„
jammed during the playback.
Back up all of the data in the USB storage device in case data was lost due to an unexpected
„
„
accident. STRONG assumes no liability for the losses by misuse or malfunction. Data backup is
the responsibility of the consumer.
4.1 Instant one-touch recording and playback
Insert an external high-speed storage device and make sure the device has enough free space. Select the
TV programme you wish to record. Press 4 to enter into PVR mode and start recording. The PVR control
bar on the screen shows as in Fig. 6, you can select the settings of your choice. If the PVR function cannot
be realized, try to format your USB device. If you wish to stop the recording, press 3 and the recording
will stop.
NOTE:
During the record mode, you cannot change channels or select another function.
„
„
If the signal is interrupted or removed while in record, the record will stop until the signal is
„
„
established. This may cause you to lose programme content.
Please do not turn the TV OFF during recording. This will make the TV exit the PVR and turn to
„
„
standby.
On some encrypted channels (using CI+ module) the recording mode is blocked by the
„
„
broadcaster
4.2 Timer recording
Go to the channel that will broadcast the programme you want to record. Press EPG on your remote
control to bring up the EPG interface. The channel you are watching will be highlighted on the screen
that appears. Press the RED button on the remote control, then enter into the programme details on
the recorder menu by pressing pq to select an item and t u to change the setting. For example, if
the programme starts at 8:30 pm on the same day, enter 30 in the space for MINUTES, 20 in the space
for HOURS (a 24 hour clock applies) and then the relevant date. Use the same method for entering the
finish time. Choose the recording mode: Once, Daily or Weekly. Press ENTER to confirm your selection. A
schedule of all your recordings (the schedule list) will appear. See chapter 4.3.3 for more on the schedule.
The recording will be active also in Standby mode.
NOTE:
If you are browsing the EPG, follow the steps on the EPG function page.
10
A recording is possible only if a USB device is connected.
English
Fig. 6
Advertisement
Table of Contents
