English
2.0 INSTALLATION
2.1 Default PIN code: 0000
2.2 Front panel
NOTE:
1. Power indicator /remote sensor
2. Standby button*
3. Speakers
* except 24": see chapter 2.3.1
2.3 Rear panel
NOTE:
2.3.1 24 inch
1. p
2. q
3.
4. ANTENNA (AIR/CABLE/LNB) IN:
5. HDMI1/HDMI2:
6. SCART:
7. DC IN:
8. USB:
:
9.
10. SERVICE:
11. PCMCIA:
2.3.2 32 inch
HDMI1 (MHL)/HDMI2:
1.
SCART:
2.
ANTENNA (AIR/CABLE/LNB) IN:
3.
The graphics are for representation only.
The graphics are for representation only.
Programme up button
Programme down button
Opens the main menu. Press short to enter the main menu
or press and hold to enter standby mode
Connect an antenna, cable, satellite dish to the TV for
searching and receiving programmes.
Connect HDMI input signal from a signal source such as
DVD, Blu-ray player or game console.
Connect devices like DVD or VCR using SCART cable.
Connect to the mains plug.
USB port.
Headphone or Earphone audio output, speakers will be
muted when earphone is plugged in and headphone
selected.
Service port.
Connect a Conditional Access Module (CAM).
Connect HDMI input signal from a signal source such
as DVD, Blu-ray player or game console. HDMI1 port
supports MHL function.
Connect devices like DVD or VCR using SCART cable.
Connect an antenna , cable, satellite dish to the TV for
searching programmes.
Fig. 2
Fig. 3
5