Table of Contents
Advertisement
English
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB
mode otherwise the USB storage device or the files stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only)
file system provided with the Windows operating system. In case of a storage device formatted
as a different utility programme which is not supported by Windows, it may not be recognized.
7. When using a USB Hard Disk Drive which is not powered independently, ensure its power does
not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must
pull out the USB Hard Disk and restart the TV system.
8. An "Unsupported File" message will be displayed if the file format is unsupported or the file is
corrupted.
9. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
10. This TV may not support some multimedia files changed and upgraded as the change of the
encoding format or other technical aspects advances.
11. Please refer to chapter 9. Appendix for a list of supported file formats for USB playback.
6.2 USB menu
Press SOURCE and select USB. You can view movie, music and photo files from your
USB storage devices. Connect a USB storage device to the USB input terminal and select the types of
media on the home page: Movie, Music and Photo. Press ENTER, the screen will show the connected USB
device, press ENTER again to view the file folders and files. Press p q to select a folder, press ENTER
to open the folder and select the files, then press ENTER to tick them. Highlight the one you want to
play first, press 1/2 to start playing or select a file and press 1/2 to start playing directly. Press 3 to stop
playing and return to upper lever folder. Continuously press RETURN to go back to upper level folder.
Repeat again to select and play another media type.
NOTE:
6.2.1 Play movies
Press INFO to display/exit from the menu bar (Fig. 7). Press the USB control buttons on the remote
control to do relevant operations.
Play & Pause/Stop/Prev./Next
Fast Reverse/Fast Forward Press and hold 5/6 for seconds to draw the playing progress as your desire,
Play Mode
Information
Go to time
By choosing one of the three media types, for example Movie, the folders
inside will display only video files and no other formats.
Press 1/2 to play or pause the playback. Press 3 to stop playing. Press
7/8 to play the previous or the next video file. Press INFO and use t u to
highlight the corresponding icon on the control bar, then press ENTER. TV
will response accordingly.
then press 1/2 to start the playing from the new position.
Highlight the corresponding icon and press ENTER to switch to another play
mode.
Highlight the corresponding icon and press ENTER to view the information of
the playing video.
Skip to specific point by input time. Highlight the corresponding icon and
press ENTER to open the Input search time screen. Press t u to move the
Fig. 7
15
Advertisement
Table of Contents
